Dominator Reverse Flow Installation Instructions
Many questions have come up about the Dominator Reverse Flow Application since it's release. Attached is a step by step presentation that takes you through exactly how to install the Dominator Reverse Flow with Pre-filter.
Reverse flow for front load installations, or where there is no down stream access, 12" deep Dominator filters are available in a reverse flow model.
Dominator Features:
Unique Channel Flow Molded Media
- 4" MERV 11 & 14 and 12" MERV 11 & 15
- Very low resistance
- High Dust Holding Capacity
- All plastic construction
- Light Weight
- Class 1 per U.L. Standard 900
LEED/Green Building
- sustainable Component for a LEED/Green building initiative
-LEED (Leadership in Engineering and Environment Design)
- Exceeds Leed/Green requirement of MERV 13
- Can help lower energy cost
4" Deep Filter are for use where space is limited. They operate at 500FPM at substantially lower resistance then competitive 4"-6" deep filters. 12" Deep Dominator filters replace traditional 12" deep rigid cell filters operating at 500-625 FPM with substantially lower resistance.
Comments